TIN-LEAD PLATING SERVICES

ProPlate’s dedicated new product development team supports new medical device projects from concept through commercialization through our proven process roadmap.

ProPlate® has a library of solutions for a wide range of parts and industries. We are always pleased to take on new challenging projects to expand our Tin-Lead Plating Services.

Tin-Lead Plating Services 1

Tin-Lead

…is a versatile alloy known for its excellent solderability, corrosion resistance, and uniform coverage. It provides a smooth, conductive surface with strong adhesion properties, making it ideal for electronic and aerospace applications. Tin/Lead plating is commonly used to enhance soldering performance, prevent whisker growth, and improve the reliability of electrical connections.

ProPlate® offers 60/40 Tin/Lead electroplating capabilities to meet your specific plating requirements, with options for both small and large parts in various-sized barrels and racks, as well as custom and prototype metal finishing

 

Contact us to request information about our plating and metal finishing services

Tin-Lead Properties

Tin-lead plating provides smooth, uniform coverage across complex geometries and fine features, producing a consistent and reliable deposited layer. The established tin-lead classes and thickness grades create a standardized nomenclature that ensures clear, repeatable specifications tailored to specific performance and application requirements.

Because tin-lead coatings are ductile and readily solderable, they are well suited for applications requiring reliable electrical connections and ease of assembly. Defined thickness grades allow the coating to be precisely specified to meet durability, solderability, and functional performance needs, supporting consistent quality and predictable results across production.

Tin - Sn
Atomic Number 50 Thermal Conductivity - W/(m*K) 67
Atomic Weight - g/mole 118.71 Electrical Resistivity - (Ohm*m) 1.10E-07
Density - g/cm³ 7.29 Electrical Conductivity - (S/m) 9.10E-06
Melting Point - C° 231.93 Hardness - Hv N/A
Melting Point - F° 449.47 Specific Heat Capacity - J/(kg*K) 217
Lead - Pb
Atomic Number 82 Thermal Conductivity - W/(m*K) 35
Atomic Weight - g/mole 207 Electrical Resistivity - (Ohm*m) 2.10E-07
Density - g/cm³ 11.34 Electrical Conductivity - (S/m) 4.80E-06
Melting Point - C° 327.46 Hardness - Hv N/A
Melting Point - F° 621.43 Specific Heat Capacity - J/(kg*K) 127

Tin-Lead Plating Specifications

ProPlate provides services per the certified ASTM B579 and MIL-P-81728. Company specific specifications can also be provided if requested.

ProPlate currently offers 60% Tin, 40% Lead, plating services.

Tin/Lead Plating to ASTM B579

The composition of the coating is 50-70% tin, with lead the remainder.

Suffix Notation:
  • F – flow brightened deposits
  • B – bright deposits (as plated)
  • M – Matte deposits
Classes of tin/lead plating services per ASTM B579 as follows:

Service Class

Application

Thickness (Steel)

Thickness (Copper)

SC4

Very Severe

30µ minimum

30µ minimum

SC3

Severe

20µ minimum

15µ minimum

SC2

Moderate

10µ minimum

8µ minimum

SC1

Mild

5µ minimum

5µ minimum

Underplating of 0.0001” nickel or copper is required for alloys containing 15% or more zinc.

Tin/Lead Plating to MIL-P-81728

Composition of the bath is specified as 50-70% Tin, 1.0% max other metals and the remainder Lead. Other compositions are permitted as specified under section 6.3.

3.2.5: Underplating – No underplating is specified except for alloys containing 15% or more zinc or beryllium. A copper or nickel underplating of 0.0001 inch is recommended on such alloys.

3.2.8: Unless otherwise specified, either a matte or bright luster shall be acceptable. For electronic components only a matte or flow brightened finish shall be furnished.

3.3.1: Thickness of Plating – Unless otherwise specified the thickness of the plating, except on electronic components, shall not be less the 0.0003 inches and shall not be greater than 0.0005 inches on visible surfaces that can be touched by a 0.75 inch sphere.

3.3.1.1: Thickness of Plating for Electronic Components – Unless otherwise specified thickness for electronic components shall be a minimum average of 0.0003 inches where measured at four points at least 0.10 inches apart with no single reading being below 0.0002 inches.

ProPlate’s dedicated new product development team supports new projects from concept through commericialization through our proven process roadmap, further expanding our capabilities.

Solderability

60/40 Tin/Lead electroplating is widely recognized for its superior solderability, making it the preferred choice for electronic components, connectors, and circuit board finishes. The alloy provides a smooth, uniform surface that ensures strong adhesion and excellent wettability, allowing for consistent and reliable solder joints.

Compared to pure Tin plating, 60/40 Tin/Lead significantly reduces the risk of tin whisker formation, which can lead to short circuits and component failure. The presence of Lead in the alloy improves ductility and thermal fatigue resistance, preventing cracks and ensuring long-term durability in high-performance applications.

Additionally, 60/40 Tin/Lead plating offers a controlled and predictable melting point of 361°F (183°C), making it ideal for reflow soldering, wave soldering, and hand soldering in electronics manufacturing. This composition ensures compatibility with traditional leaded soldering processes, providing a reliable, high-quality finish for aerospace and industrial applications.

Electricians are using a soldering iron to connect the wires to the metal pin with soldering lead.
Shopping Cart

Have questions or need more information?

Ask an Expert!

"*" indicates required fields

Drop files here or
Max. file size: 30 MB.

    METAL FINISHES & SERVICES WE DO NOT PROVIDE

    Chrome • Black Nickel • Cosmetic Jewelry